StandardsNational : CSA C22.2 N° 2556; CSA C22.2 N° 51
Solid copper circuit conductors, with low temperature EXELENE® cross-linked polyethylene insulation (RW90 XLPE), with two additional solid copper bonding conductors (one bare, one covered with green EXELENE®, (RW90 XLPE). Twisted assembly paper wrapped and covered with interlocked aluminum tape armour. Rated 600 volts. LEAD FREE and RoHS compliant.
Limited Smoke Zero Halogen - CSA rated ST1 per CSA 22.2 No. 2556
For open and concealed wiring in dry locations only.
This cable is recommended for installations where an isolated ground is required (i.e. computer and other electronic equipment or special installations).
Minimum recommended installation temperature minus 40°C (with suitable handling procedures).
Maximum conductor temperature 90°C.
|Maximum operating voltage||600V|
|Maximum operating temperature||40°C|
Products and services
Docs and info
Two-conductor cable contains black and white circuit conductors, green isolated ground conductor, and a bare copper bonding conductor.
Three-conductor cable contains red, black and white circuit conductors, green isolated ground conductor, and a bare copper bonding conductor.
**Isolated Ground Conductor" covered with green (RW90) XLPE. Refer to the Canadian Electrical Code (CE Code) Part 1 (Rules 24-100 to 24-116) for rules covering cables and systems containing isolated grounding conductors, etc.