CORFLEX® RA90 Aluminum

Compact ACM aluminum conductors with EXELENE^® cross-linked polyethylene insulation (RW90 XLPE) enclosed in a liquid- and vapour-tight solid corrugated aluminum sheath. An overall sunlight resistant, low temperature, low acid gas and low flame spread (LAG/LFS) PVC jacket with FT4 and AG14 rating.
Unjacketed CORFLEX^® with FT4 and AG14 ratings is also available. 

Rated 600 volts. LEAD FREE and RoHS compliant.

CSA File #LL19376 Class 5812 01 - Cable
CSA File #LL19376 Class 5818 01 - Hazardous Location Cable Application

Application 

• For exposed and concealed wiring in dry or wet locations and where exposed to the weather. Nexans cables are marked "SUN RES" for sunlight resistant.
• For use in ventilated, non-ventilated, and ladder type cabletroughs and ventilated flexible cableways in dry or wet locations.
• For direct earth burial (with protection as required by Inspection Authority). For direct embedding in concrete, masonry or plaster (with permission as required by Local Inspection Authority).
• For service entrance above or below ground.

CORFLEX^® cable is certified for use in hazardous locations with approved connectors. Nexans Canada Type W connector are approved for Class II Divisions 1 and 2 (Groups E, F and G) and Class III Divisions 1 and 2.

Versatile

• Reduced material handling required for installation
• Reduced cable splices as can transition between applications in buldings, outdoors and undergroud
• Reduced physical supports as hand-trainable and maintains shape
• Ideal for larger circuits 1000 amps and more
• Suitable for direct burial or concrete encasement
• Fire resistant for 1 to 2 hours when embedded in concrete
• Cost-effective alternative to bus duct or cable bus